The minimum layer must be respected in each and every point of the soon to be sealed surface. The first layer of Weber.Tec Superflex D2 must be applied on the entire surface of the support which was prepared in a compact layer (approx. In order to obtain a waterproof layer you need to apply at least two layers (3 layers for the surfaces exposed to water under pressure). The obtained paste must be applied with a brush, roller, paintbrush, mechanical or steel trowel. The mixing ratio must be 1:1 in terms of weight. Mix the two components using an electric mixer for two-three minutes (at a maximum torque of 800 rpm) until a homogenous paste is obtained. Pour one liquid component into a bucket, over which you must add the powder component. WORK AND PREPARATION METHOD: The flexible Weber.Tec Superflex D2 water insulation is a bicomponent material: a liquid-pasty component and a powder one. The cracks and cavities larger than 5 mm must be closed and filled. The margins, edges and corners must be rounded and lumps must be leveled out. sealed parts and residues which may diminish the adherence must be removed. SUPPORT PREPARATION: The supporting surface must be clean, undeformable, dry, fixed, free of slippery surfaces (grease, bitumen, tar, dust etc.), must not present frost traces, free of large cracks or lumps. Contains high reactivity polymers, reactive filling materials and additives.Ģ components, in plastic buckets of 5 kg (60 buckets/pallet).Ģ components, in plastic buckets of 20 kg (18 buckets/pallet). The Weber.Tec Superflex D2 is a flexible bicomponent water insulation with fast adhesion, based on cement and quartz sand. Especially recommended as a sealant underneath natural stone and ceramic claddings. It can also be used as an adhesive for extruded polystyrene, rigid foam tiles and miner fiber tiles. As a preliminary sealing and binding layer under a polymeric modified bitumen, the water insulation goes on under brickworks and binding layers on old anionic bitumen surfaces. It can also be used for sealing the underground walls at the interior as well as for sealing water tanks (found indoor, with water column of maximum 15 m). Our facilities allow versatility in our product range enabling us to comply with clientele specifications & customizations.Flexible bicomponent water insulation for both the interior and the exterior, most often used on cellar walls made out of brick or concrete, underground walls, concrete walls, foundations etc. conduit & tubing is manufactured with the latest technology process & with the highest standard. for meat & poultry industries, 3A for the dairy industry, & FDA compliance for the food & beverage industry. This is reflected in many of Superflex’s products approved or recognized by Underwriter Laboratories, Canadian Standard Association, International Association of Plumbing & Mechanical Officials, U.S.D.A. The quality of Superflex goods is world renowned. Superflex produces its Rollerflex™ Spiral reinforced Hoses & Sealproof Electrical Conduit & Tubing in its state of the art manufacturing facilities located in Elizabeth, NJ. This is reflected in our rigorous quality control measures, our expanded research and development of new applications, and our ever increasing markets and distribution. We take great pride and care in every aspect of our company. Our products have multiple applications used by, but not limited to the marine craft, aquatic, pond, spa, electrical conduit, agricultural, recreational vehicle, and industrial sectors. ![]() Since its foundation in 1981, Superflex has expanded to become a leading force in the hose industry. is a New Jersey based company engaged in the manufacturing of flexible spiral reinforced hoses and electrical conduit.
0 Comments
Leave a Reply. |